• Stepper Motor Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase

Size:    42.3 mm square × 48 mm
(NEMA 17)1

NEMA size:    17
Weight:    350 g
Shaft diameter:    5 mm
General specifications
Shaft type:    5 mm "D"
Steps per revolution:    200
Current rating:    1200 mA2

Voltage rating:    4 V
Holding torque:    44 oz•in
Resistance:    3.3 Ohm2

Inductance per phase:    2.8 mH
Number of leads:    6
Lead length:    30 cm


Write a review

Note: HTML is not translated!
    Bad           Good

Stepper Motor Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase

  • Product Code: DT87
  • Availability: In Stock
  • Rs.1,300


Related Products

SG90 9G Micro Servo Motor

SG90 9G Micro Servo Motor

Description:The TowerPro SG90 mini servo motor  is lightweight, high-quality and lightning-fast..

Rs.230

TowerPro MG946R Servo 25T 12kg / 0.20sec / 55g

TowerPro MG946R Servo 25T 12kg / 0.20sec / 55g

Higher torque version of the MG995. Good for slow trainers, retract or steering/rudder servos.Weight..

Rs.650

TOWERPRO MG995 - CONTINUOUS ROTATION 360° METAL GEAR SERVO MOTOR 9.2KG

TOWERPRO MG995 - CONTINUOUS ROTATION 360° METAL GEAR SERVO MOTOR 9.2KG

PRODUCT DESCRIPTIONTowerPro MG995 - Continuous rotation 360° Metal Gear Servo Motor Operating S..

Rs.950

S0090MD metal gear 9g digital servo

S0090MD metal gear 9g digital servo

FeaturesHigh presicion copper gears made by CNC;Select torque motor,could compare with import one;lo..

Rs.500

A4988 Stepper Motor Driver with Heatsink for 3D Printer

A4988 Stepper Motor Driver with Heatsink for 3D Printer

The A4988 stepper motor driver carrier is a breakout board for Allegro’s easy-to-use A4988 microst..

Rs.220

5V Stepper Motor with ULN2003 Drive Test Module Board

5V Stepper Motor with ULN2003 Drive Test Module Board

Voltage: 5V. Diameter: 28mm. Step angle: 5.625 x 1 / 64. Reduction ratio: 1 / 64. 5 Line 4 phase c..

Rs.280

Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N

Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N

The L298N driver module, using ST L298N chip can directly drive two 3-30V DC motor, and provides a..

Rs.240

Tags: Stepper, Motor:, Unipolar, Bipolar, 200 Steps, 4V,