Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/session.php on line 25Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/startup.php on line 96Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/startup.php on line 154 ST-Link STM8/STM32 v2 Programmer & Emulator/driver

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy whenever you encounter them. You can even get 5V and regulated 3.3V power!

Comes with one USB stick and a couple pieces of female-female jumpers. You may want to peruse our jumper selection if you need more or different sizes.

We wired it up to an ST32F205 and ran ST-Link, and worked great! You can even update the firmware on the dongle as necessary, it has a DFU bootloader.

Features

  • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
  • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features:
  • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
  • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
  • JTAG supported
  • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 1000 Vrmshigh isolation voltage (ST-LINK/V2-ISOL only)

Write a review

Note: HTML is not translated!
    Bad           Good

ST-Link STM8/STM32 v2 Programmer & Emulator

  • Product Code: ST-Link STM8/STM32 v2
  • Availability: In Stock
  • Rs.400


Related Products

1602 LCD Keypad Shield For Arduino

1602 LCD Keypad Shield For Arduino

This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2x1..

Rs.500

12-bit PWM/Servo Driver – 16-Channel PCA9685

12-bit PWM/Servo Driver – 16-Channel PCA9685

12-bit PWM/Servo Driver – 16-Channel PCA9685(Arduino,Resberry Pi, Pic) Shield Module Dimensions (no..

Rs.450

 Brushless Motor A2212-10T BLDC

Brushless Motor A2212-10T BLDC

A2212-10T Outrunner Brushless Motor 1400 kv BLDC 1. 100% brand new and high quality 2. High qualit..

Rs.750

  Arduino Compatible Prototype Shield With Mini Breadboard

Arduino Compatible Prototype Shield With Mini Breadboard

Connect your prototype circuit to the Arduino easily with this simple to use Arduino shield.It inclu..

Rs.250