This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
Each straight bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 10kg.

    This module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog channel input, the internal integration of a gain programmable amplifier 128. Input circuit can be configured to provide an electrical bridge bridge voltage (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module, Two selectable differential input channels

specifications 

    • On-chip active low noise PGA with selectable gain of 32, 64 and 128
    • On-chip power supply regulator for load-cell and ADC analog power supply
    • On-chip oscillator requiring no external component with optional external crystal
    • On-chip power-on-reset
    • Simple digital control and serial interface: pin-driven controls, no programming needed
    • Selectable 10SPS or 80SPS output data rate
    • Simultaneous 50 and 60Hz supply rejection
    • Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
    • Operation supply voltage range: 2.6 ~ 5.5V
    • Operation temperature range: -40 ~ +85℃
    • 16 pin SOP-16 package

    Write a review

    Note: HTML is not translated!
        Bad           Good

    10Kg Scale Load Cell Weight Weighing Sensor +HX711 AD Module

    • Product Code: HX711
    • Availability: In Stock
    • Rs.450


    Related Products

    Arduino Uno - R3

    Arduino Uno - R3

    Description: This is the new Arduino Uno R3. In addition to all the features of the previous bo..

    Rs.540

    ARDUINO UNO R3 SMD – Economic

    ARDUINO UNO R3 SMD – Economic

    The Uno R3 module is a cheap alternative to the Arduino Uno Boards. It is equipped wi..

    Rs.390

    Breadboard Power Supply USB - 5V/3.3V

    Breadboard Power Supply USB - 5V/3.3V

    This is a must have for anyone who uses breadboard to prototype their projects. This module has made..

    Rs.250

    Arduino Duemilanove

    Arduino Duemilanove

    The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 (datash..

    Rs.950

    Arduino Compatible Sensor Shield V4.0

    Arduino Compatible Sensor Shield V4.0

     This shield is compatible with most types of Arduino boards that support the standard header l..

    Rs.300

    50Kg 110lb Body Load Cell Weighing Sensor For DIY Arduino

    50Kg 110lb Body Load Cell Weighing Sensor For DIY Arduino

    When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion o..

    Rs.180