Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/session.php on line 25Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/startup.php on line 96Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/startup.php on line 154 150W DC/DC Booster 10-32V to 12-35V Power Supply Module in pakistan

This versatile DC-DC boost power supply/converter module steps up any input voltage from 10V to 32V to any output voltage from 12V to 35V at up to 150W output power and 6A current.

This 150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply is well into the heavy-duty end of the spectrum @ 150W; as you can tell by the huge toroidal inductor and dual heatsinks.

It is especially useful for automotive 12V applications, where standard 12V battery power can be boosted to 19V for use as a laptop computer power supply, or to 18V or 24V for other applications requiring higher voltages.

            specifications:

  • Module Properties: non-isolated step-up module (BOOST)
  • Input voltage :10-32V
  • Output voltage: 12-35V (adjustable)
  • Output Current: 10A (MAX)
  • Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
  • Output power: natural cooling 100W (MAX), enhance heat dissipation (fan cooling) 150W (MAX)
  • Device operates at 45°C when powered from a 12V battery and charging a 19V 3.42A notebook
  • Conversion efficiency: 94% @16VIN 19V Out. This is fairly uniform, but will vary across the range.
  • Output Ripple: 2% (MAX) 20M-bandwidth
  • Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)
  • Full load temperature rise: 45°C
  • No-load current: 25mA typical
  • Voltage regulation: ± 0.5%
  • Dynamic response speed: 5% 200uS
  • Short circuit protection: None (we recommend a fuse and/or protection circuits at input)
  • Input Reverse Polarity Protection: None (we recommend a series diode at the input port.

             Applications:

            1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely),                     However,the output voltage can not be less than the input voltage.

            2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.

            3. Boost charger. You can use the 12V power supply to charge battery more than 12V, for example, 24V battery.


 

Write a review

Note: HTML is not translated!
    Bad           Good

150W DC/DC Booster 10-32V to 12-35V Power Supply Module

  • Product Code: DC 1035
  • Availability: In Stock
  • Rs.410


Related Products

Arduino Uno - R3

Arduino Uno - R3

Description: This is the new Arduino Uno R3. In addition to all the features of the previous bo..

Rs.540

1 Relay Module(AC250V 10A DC30V 10A)

1 Relay Module(AC250V 10A DC30V 10A)

Easy to connect RF / Bluetooth wireless interface supports XBee / BTBee, nRFL2401, CC1101 wireless m..

Rs.90

Archiduino, compatible with Arduino Leonardo

Archiduino, compatible with Arduino Leonardo

A quick look in the table below allows us to easily detect that, by using Archiduino Kit Plus vers..

Rs.4,900