Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/session.php on line 25Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/startup.php on line 96Warning: Cannot modify header information - headers already sent by (output started at /home/denomlwr/public_html/index.php:1) in /home/denomlwr/public_html/catalog/controller/startup/startup.php on line 154 0.91'' OLED LCD 128x32 Display Module in pakistan

This display is small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!

The driver chip SSD1306, communicates via I2C only. 3 pins are required to communicate with the chip in the OLED display, two of which are I2C data/clock pins.

The OLED and driver require a 3.3V power supply and 3.3V logic levels for communication. To make it easier for our customers to use, we've added a 3.3v regulator and level shifter on board! This makes it compatible with any 5V microcontroller, such as the Arduino.

The power requirements depend a little on how much of the display is lit but on average the display uses about 20mA from the 3.3V supply. Built into the OLED driver is a simple switch-cap charge pump that turns 3.3v-5v into a high voltage drive for the OLEDs, making it one of the easiest ways to get an OLED into your project!

specifications

  • Diagonal Screen Size:0.91"
  • Number of Pixels:128 × 32
  • Color Depth:Monochrome (White)
  • Module Construction:COG
  • Module Size (mm):46.30× 11.50 × 1.45
  • Panel Size (mm):30.00 × 11.50 × 1.45
  • Active Area (mm):22.384 × 5.584
  • Pixel Pitch (mm):0.175 × 0.175
  • Pixel Size (mm):0.159 × 0.159
  • Duty:1/32
  • Brightness ( cd/m2):150 (Typ) @ 7.25V
  • Interface:I2C
  • PCB: 20mm x 35mm (0.8" x 1.4")
  • Display area: 7mm x 25mm
  • Thickness: 4mm

Write a review

Note: HTML is not translated!
    Bad           Good

0.91'' OLED LCD 128x32 Display Module

  • Product Code: OLED LCD:12832
  • Availability: In Stock
  • Rs.400


Related Products

Arduino Uno - R3

Arduino Uno - R3

Description: This is the new Arduino Uno R3. In addition to all the features of the previous bo..

Rs.540

ARDUINO UNO R3 SMD – Economic

ARDUINO UNO R3 SMD – Economic

The Uno R3 module is a cheap alternative to the Arduino Uno Boards. It is equipped wi..

Rs.390

Half-size breadboard

Half-size breadboard

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) wit..

Rs.100

Arduino DUE R3 SAM3X8E 32bit ARM Development Board

Arduino DUE R3 SAM3X8E 32bit ARM Development Board

Description The Due board for Arduino is a microcontroller board based on the Atmel SAM3X8E ARM C..

Rs.2,200

Arduino Compatible Sensor Shield V4.0

Arduino Compatible Sensor Shield V4.0

 This shield is compatible with most types of Arduino boards that support the standard header l..

Rs.300